When we say here at MecSoft Corporation that we are Your CAM Partner we mean exactly that! We strive to ensure that you experience resounding success using our CAM software. We’re here for you from day one and on every CAM project. We are also very proud and excited to be able to showcase a […]
This cool project was designed by Ben McDonald at The University of Arizona College of Architecture, Planning and Landscape Architecture Material Labs. In this project Ben designs and fabricates a tile system used to disperse incoming sunlight. The design incorporates RhinoCAM toolpaths that are used to help refract the incoming light along the cutter paths. […]
This cool project was designed by Jed Laver at The University of Arizona College of Architecture, Planning and Landscape Architecture Material Labs. In this project Jed uses RhinoCAM in the process of making the ceramic tiles for his next-generation EcoCeramic CMU (Concrete Masonry Units). The master molds were cut from MDF (Medium Density Foam) using […]
The University of Arizona College of Architecture, Planning and Landscape Architecture Material Labs is an extension of the University of Arizona’s pedagogical mission to provide environments to explore, model, fabricate, and test design ideas. The labs encompass a 9,000 sq. ft. facility providing a professional quality environment and equipment accommodating a wide variety of materials […]
This article describes the use of two different modules in RhinoCAM, RhinoCAM-MESH and RhinoCAM-MILL. The RhinoCAM-MESH module contains an Inspect & Modify menu (shown below) with commands that allow you to Inspect your mesh models using various reflection and curvature comparison techniques. More importantly, the menu contains Mesh modification commands such as Reduce Mesh, Re-Mesh […]
Jim Lohmann of Lohmann Woodcarving Company has been practicing woodcarving by hand for the past 45 years, getting his start in the Boston area, and then moving to Chicago. Today, Jim works from his workshop in Covington, Michigan where he has been practicing his craft for the past 30 years. For centuries, the “tools-of-the-trade” of […]
Dr. Casey Kerrigan and OESH Shoes have developed their own production 3D printers that OESH uses to produce the soles for their line of 3D printed sandals. With a grant from the National Science Foundation Casey was able to refine the development of the thermoplastic extruder that her 3D printers required. Casey also taught her […]
The Thermoplastic Heater Block design shown here is a great example of how VisualMILL’s 2½ Axis toolpath strategies can be used to quickly and effectively rough and finish a complete 3-dimensional component. Maggie Rogers, Design & Fabrication Specialist with OESH Shoes, in Charlottesville, Virginia is using VisualMILL’s Roughing, Profiling, Hole Pocketing, Drilling, Chamfering and Thread […]
VisualMILL gets the job done at OESH Shoes.
Conley Manufacturing located in Shelby Township just north of Sterling Heights, MI manufactures machined tool & die components for the automotive and aerospace production markets.
