FREE Guide – Getting Started With VisualCAMc For Onshape!
Here’s a free guide to using VisualCAMc, production CAM for Onshape.
3D Mesh Editing & Machining
This article describes the use of two different modules in RhinoCAM, RhinoCAM-MESH and RhinoCAM-MILL. The RhinoCAM-MESH module contains an Inspect & Modify menu (shown below) with commands that allow you to Inspect your mesh models using various reflection and curvature comparison techniques. More importantly, the menu contains Mesh modification commands such as Reduce Mesh, Re-Mesh […]
The 2018 VisualCAD Companion!
As a companion to our recently released 2018 VisualCAD Exercise Guide, MecSoft Corporation is proud to announce the release of The 2018 VisualCAD Companion, a FREE 300-page guide to VisualCAD, MecSoft’s free CAD program! VisualCAD can be download as part of VisualCAD/CAM 2018, MecSoft’s flagship Computer Aided Manufacturing Software. This guide includes descriptions, command prompts […]
Restoring George Washington
Jim Lohmann of Lohmann Woodcarving Company has been practicing woodcarving by hand for the past 45 years, getting his start in the Boston area, and then moving to Chicago. Today, Jim works from his workshop in Covington, Michigan where he has been practicing his craft for the past 30 years. For centuries, the “tools-of-the-trade” of […]
Decorative Wood Carving
This fireplace mantel project is a great example of how RhinoCAM CNC software has become one of Jim Lohmann’s (of Lohmann WoodCarving Company) goto software programs in his digital woodcarving workshop. Here RhinoCAM is used to machine complex 3D mesh models that Jim has sculpted in ZBrush. Jim designed the mantel shown below from a […]
The 2018 VisualCAD Exercise Guide!
Many of you have asked for more training materials on VisualCAD, MecSoft’s free CAD drawing and modeling program! In response, we are very excited to announce the release of The 2018 VisualCAD Exercise Guide, a FREE 200-page guide to using VisualCAD, MecSoft’s free CAD program! VisualCAD can be downloaded as part of VisualCAD/CAM 2018. This guide […]
VisualMILL Helps OESH Shoes Design Production 3D Printers
Dr. Casey Kerrigan and OESH Shoes have developed their own production 3D printers that OESH uses to produce the soles for their line of 3D printed sandals. With a grant from the National Science Foundation Casey was able to refine the development of the thermoplastic extruder that her 3D printers required. Casey also taught her […]
Machining a Thermoplastic Heater Block in 2½ Axis using VisualMILL
The Thermoplastic Heater Block design shown here is a great example of how VisualMILL’s 2½ Axis toolpath strategies can be used to quickly and effectively rough and finish a complete 3-dimensional component. Maggie Rogers, Design & Fabrication Specialist with OESH Shoes, in Charlottesville, Virginia is using VisualMILL’s Roughing, Profiling, Hole Pocketing, Drilling, Chamfering and Thread […]
Women in CAM: Dr. Casey Kerrigan & OESH Shoes
VisualMILL gets the job done at OESH Shoes.
The 2018 Cutting Tools Workbook is Here!
MecSoft Corporation is excited to announce the release of The 2018 Cutting Tools Workbook, a FREE 100-page guide to working with cutting tools in its 2018 line-up.
© Copyright - MecSoft Corporation - CAD/CAM Software