Free mill for rhino
overview
Learn More
Feature List
overview
FreeMILL for Rhino – Free CAM Software in Rhino
FreeMILL, as the name indicates, is a free milling module for programming CNC mills & routers. FreeMILL running inside the Rhinoceros NURBS modeling software, gives you a great entry level milling software product that is completely free of cost! Yes, completely free with no time limits, number of tries limit, number of saves limit or lines of code limit! (Note that the Rhinoceros NURBS modeler needs to be purchased and licensed separately.)
Rhino
With FreeMILL you will be able to:
1. Create a toolpath where the tool is driven along a set of parallel
2. Create both Roughing and Finishing toolpaths
3. Run full cutting and material simulation of toolpaths
4. Output G code to your machine tool of choice
2. Create both Roughing and Finishing toolpaths
3. Run full cutting and material simulation of toolpaths
4. Output G code to your machine tool of choice
Learn More
FreeMILL for Rhino (Make sure Rhino is installed on your machine first)
FreeMILL is not a separate product but is a module that is included in RhinoCAM and thus runs as a plug-in inside Rhinoceros.
FreeMILL is not a separate product but is a module that is included in RhinoCAM and thus runs as a plug-in inside Rhinoceros.
Note that even though you may choose not to purchase RhinoCAM you can still run FreeMILL completely free of cost, while the rest of the CAM product will continue running in Demo mode, that is, without the ability to save CAM data or post-process toolpaths.
Feature List
Freemill Features
The table below summarizes the various features found FreeMILL.
| Cutting Direction | Set tool axis direction to cut part from different orientations |
| Stock | Create a rectangular box stock to start machining from |
| Machine Coordinates | Set machine zero to any point on the model |
| Tools | Create Ball, Flat and Corner Radius Mills |
| Feeds & Speeds | Set the cutting feeds and spindle RPM to control cutting |
| 3 Axis Milling | Create parallel cuts along the X or the Y direction |
| Toolpath Simulation | Perform cut simulation to visualize machined part |
| Post-Processing | Select from over 300 controllers to output toolpaths to |