Hi
I am trying to find the Toolpath Editor. When I double click my toolpath, I only get Toolpath Viewer. I am trying to add "Arcs" to the Toolpath.
I am a total Newbie so please be kind and patient with me
Thanks in advance
GOF
How do I find Toolpath Editor in RhinoCAM 2015
-
- Posts: 2
- Joined: Mon Mar 23, 2015 8:20 am
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: How do I find Toolpath Editor in RhinoCAM 2015
Hi GOF,
The toolpath editor is only available in the PRO configuration. If you have any other configuration lower than that you will only see the Toolpath viewer when you double click the toolpath.
Please go to http://mecsoft.com/rhinocam-mill/ and click on the Feature List tab and select the Other Features to see under which configurations the Toolpath editor is included.
The toolpath editor is only available in the PRO configuration. If you have any other configuration lower than that you will only see the Toolpath viewer when you double click the toolpath.
Please go to http://mecsoft.com/rhinocam-mill/ and click on the Feature List tab and select the Other Features to see under which configurations the Toolpath editor is included.