error with MCU light

All discussion related to the VisualCAD/CAM standalone product.
Post Reply
wamnet
Posts: 10
Joined: Wed Aug 01, 2007 4:15 pm
Location: manassas va usa
Contact:

error with MCU light

Post by wamnet »

I keep getting an app error upon launching MCU from either the post to mcu or from the menu:

Faulting application mcu.exe, version 2.1.6.0, faulting module unknown, version 0.0.0.0, fault address 0x7470b439

Application popup: CiceroUIWndFrame: MCU.exe - Application Error : The instruction at "0x7470b439" referenced memory at "0x7470b439". The memory could not be "read".

Any ideas? I was a registered user of Metacut View years ago and it still works...
MecSoft Support
Posts: 2405
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA
Contact:

error with MCU light

Post by MecSoft Support »

Please contact the people at North Wood Designs with this problem. It looks like the version of MCU that you have is crashing for some reason. Send email to [email protected] and he should be able to help you with this problem.
Post Reply