Need help with approach/engage speed output

[SN96]

I have Visual mill 6.0 using mach3 and sherline 5400 with the sherline steppers and controller box. My only problem is it does not appear that my settings for the approach and engage speeds are being used. I don't know what I need to changed in the post processor to get this to output in the post file. Here is an example of my output code.

Code: Select all

N49 (Engraving Vents)
N50 M6 T3
N51 M03 S1500
N52 G00 G43 H1 Z1
N53 G01 X0.4416 Y1.0639 Z0.0625 F22.0
N54 Z-0.0136 F5.0
N55 Y0.5476 F3.0
N56 Z-0.0273
N57 Y1.0639
N58 Z-0.0409
N59 Y0.5476
N60 Z-0.0545
N61 Y1.0639
N62 Z-0.0682
N63 Y0.5476
N64 Z-0.0818
N65 Y1.0639
N66 Z-0.0955
N67 Y0.5476
N68 Z-0.1091
N69 Y1.0639
N70 Z-0.1227
N71 Y0.5476
N72 Z-0.1364
N73 Y1.0639
N74 Z-0.1500
N75 Y0.5476
N76 Z0.0625 F22.0
N77 X0.7044 Y1.0639
N78 Z-0.0136 F5.0
N79 Y0.5476 F3.0
N80 Z-0.0273
N81 Y1.0639
N82 Z-0.0409
N83 Y0.5476
N84 Z-0.0545
N85 Y1.0639
N86 Z-0.0682
N87 Y0.5476
N88 Z-0.0818
N89 Y1.0639
N90 Z-0.0955
N91 Y0.5476
N92 Z-0.1091
N93 Y1.0639
N94 Z-0.1227
N95 Y0.5476
N96 Z-0.1364
N97 Y1.0639
N98 Z-0.1500
N99 Y0.5476
N100 Z0.0625 F22.0
N101 X0.9672 Y1.0639
N102 Z-0.0136 F5.0
N103 Y0.5476 F3.0
N104 Z-0.0273
N105 Y1.0639
N106 Z-0.0409
N107 Y0.5476
N108 Z-0.0545
N109 Y1.0639
N110 Z-0.0682
N111 Y0.5476
N112 Z-0.0818
N113 Y1.0639
N114 Z-0.0955
N115 Y0.5476
N116 Z-0.1091
N117 Y1.0639
N118 Z-0.1227
N119 Y0.5476
N120 Z-0.1364
N121 Y1.0639
N122 Z-0.1500
N123 Y0.5476
N124 Z0.0625 F22.0
N125 X2.8751 Y0.1871
N126 Z-0.0136 F5.0
N127 X3.1156 Y0.4276 F3.0
N128 Z-0.0273
N129 X2.8751 Y0.1871
N130 Z-0.0409
N131 X3.1156 Y0.4276
N132 Z-0.0545
N133 X2.8751 Y0.1871
N134 Z-0.0682
N135 X3.1156 Y0.4276
N136 Z-0.0818
N137 X2.8751 Y0.1871
N138 Z-0.0955
N139 X3.1156 Y0.4276
N140 Z-0.1091
N141 X2.8751 Y0.1871
N142 Z-0.1227
N143 X3.1156 Y0.4276
N144 Z-0.1364
N145 X2.8751 Y0.1871
N146 Z-0.1500
N147 X3.1156 Y0.4276
N148 Z0.0625 F22.0
N149 X3.2351 Y0.1871
N150 Z-0.0136 F5.0
N151 X3.4756 Y0.4276 F3.0
N152 Z-0.0273
N153 X3.2351 Y0.1871
N154 Z-0.0409
N155 X3.4756 Y0.4276
N156 Z-0.0545
N157 X3.2351 Y0.1871
N158 Z-0.0682
N159 X3.4756 Y0.4276
N160 Z-0.0818
N161 X3.2351 Y0.1871
N162 Z-0.0955
N163 X3.4756 Y0.4276
N164 Z-0.1091
N165 X3.2351 Y0.1871
N166 Z-0.1227
N167 X3.4756 Y0.4276
N168 Z-0.1364
N169 X3.2351 Y0.1871
N170 Z-0.1500
N171 X3.4756 Y0.4276
N172 Z0.0625 F22.0
N173 X3.5951 Y0.1871
N174 Z-0.0136 F5.0
N175 X3.8356 Y0.4276 F3.0
N176 Z-0.0273
N177 X3.5951 Y0.1871
N178 Z-0.0409
N179 X3.8356 Y0.4276
N180 Z-0.0545
N181 X3.5951 Y0.1871
N182 Z-0.0682
N183 X3.8356 Y0.4276
N184 Z-0.0818
N185 X3.5951 Y0.1871
N186 Z-0.0955
N187 X3.8356 Y0.4276
N188 Z-0.1091
N189 X3.5951 Y0.1871
N190 Z-0.1227
N191 X3.8356 Y0.4276
N192 Z-0.1364
N193 X3.5951 Y0.1871
N194 Z-0.1500
N195 X3.8356 Y0.4276
N196 Z0.0625 F22.0

[MecSoft Support]

Would you be able to upload the VisualMILL part file or email it to [email protected] so we could take a look at it?