Fanuc accepts no decimal point in dwell
Posted: Thu Mar 22, 2012 4:51 am
My Fanuc Oi-MC control does not accept the decimal point that is output for the dwell time.
However, it needs the decimal point for the X, Y and Z movements.
The dwell time is programmed in milliseconds. So 'P2000' means a dwell of 2 second.
Example: N630 G82 X-27.2 Y31.122 Z11.022 R17.122 P2000. F127
Is there a way to get the dwell output without a decimal point?
However, it needs the decimal point for the X, Y and Z movements.
The dwell time is programmed in milliseconds. So 'P2000' means a dwell of 2 second.
Example: N630 G82 X-27.2 Y31.122 Z11.022 R17.122 P2000. F127
Is there a way to get the dwell output without a decimal point?