Preferences, Part Units
Clicking "no" still performs a units change.
Perhaps the only two choices should be "yes" and "Cancel"
In addition, when telling it "no", the size increases!
Part Unit failure
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Part Units - click Yes - Scales the part and changes the part units.
For example: Part that is 1 x 1 Inch would change to 25.4 x 25.4 MM
Part Units - click No - Changes the part units without scaling the model.
For example: Part that is 1 x 1 Inch would change to 1 x 1 MM
Part Units - click Cancel cancels the units change.
For example: Part that is 1 x 1 Inch would change to 25.4 x 25.4 MM
Part Units - click No - Changes the part units without scaling the model.
For example: Part that is 1 x 1 Inch would change to 1 x 1 MM
Part Units - click Cancel cancels the units change.