ShopBot at IWF uses 5 axis RhinoCAM
-
- Posts: 397
- Joined: Wed Oct 07, 2009 11:10 am
- Location: Irvine, CA - 92614
- Contact:
ShopBot at IWF uses 5 axis RhinoCAM
Here are some pictures from the ShopBot booth at the IWF show in Atlanta, week of Aug 23rd. They were showing some 5 axis cuts using RhinoCAM.
- Attachments
-
- Img_2688.jpg (46.74 KiB) Viewed 25465 times
-
- Img_2714.jpg (35.4 KiB) Viewed 25465 times
-
- Img_2716.jpg (78.07 KiB) Viewed 25465 times
-
- Posts: 397
- Joined: Wed Oct 07, 2009 11:10 am
- Location: Irvine, CA - 92614
- Contact:
I missed the Laguna machine somehow, so post thos epics when you find. I'd be interested to see that.
I try to get the Camaster crowd into Rhino/Rhinocam, but alot seem to come from non-CAD backgrounds, and find Vectric type programs more 'friendly' to start with. I find those kind of programs a real pain to draft in though.
I try to get the Camaster crowd into Rhino/Rhinocam, but alot seem to come from non-CAD backgrounds, and find Vectric type programs more 'friendly' to start with. I find those kind of programs a real pain to draft in though.