Page 1 of 1
Rhinocam and Roland JWX-10
Posted: Wed Aug 13, 2008 8:19 am
by arxech
Hello Everyboldy,
I am looking for Rhinocam Posts for Roland JWX-10. If someone has it, could you please let me have it? or submit to MecSoft and make me download it?
Thank you in advance.
Tae
Posted: Wed Aug 13, 2008 10:35 am
by MecSoft Support
Download the MDX-40 post from
http://www.mecsoft.com/Mec/Downloads/posts.shtml
Copy it to the Posts folder under the RhinoCAM installation folder.
This will work for the JWX-10 as well.
Posted: Fri Aug 22, 2008 5:55 am
by arxech
Dear Mecsoft,
Thank you for you help and I have another problem with MDX-40 post.
First problem was that the spindle speed was not controlled but I solved it with post generator in rhinocam.
But second problem is that the MDX-40 post is not compatible with 4th Axis of jwx-10. I took several look at codes that was generated from rhinocam. but I have no idea to solve it. Could you please help me to solve this problem?
Thank you in advance.
Tae
Posted: Wed Aug 27, 2008 9:09 am
by MecSoft Support
Please send a detailed email to
[email protected] and we will take a look at your problem.