Faster Toolpath Calculation
Posted: Tue Jan 25, 2005 11:38 pm
Some Tips to Speed up your computer for VM
First, Set a Fixed Page File Size, Aprox 4 Times your ram size
ex, 1 g ram set page file to 4000mb
Also, You can dedicate a Harddrive for you Page file.
I have a 36g 10000rpm SATA hard drive. The only thing on the drive is my 4g page file.
With this setup I experienced between 20-25% faster Toolpath calculation speeds.
A Fast SATA hard drive sells for about $160.00 cnd
Just make sure your motherboard has Raid.
Good Luck
Alex Knoll
[Edited by C3D Solutions on 25-Jan-05 22:39]
First, Set a Fixed Page File Size, Aprox 4 Times your ram size
ex, 1 g ram set page file to 4000mb
Also, You can dedicate a Harddrive for you Page file.
I have a 36g 10000rpm SATA hard drive. The only thing on the drive is my 4g page file.
With this setup I experienced between 20-25% faster Toolpath calculation speeds.
A Fast SATA hard drive sells for about $160.00 cnd
Just make sure your motherboard has Raid.
Good Luck
Alex Knoll
[Edited by C3D Solutions on 25-Jan-05 22:39]