Hi Mecsoft,
what is the mistake, when I make some drawing in Rhino and have some
different layers ( one the part, one clamps, one regions etc.), if
I import into VM, nothing is missing, but even part is on different VM-Layers, has different colours, even black (difficult to see).
This happens with import of 3Dm and IGS import as well.
Sorting of elements cost a lot of time.
Should I import every level of Rhino extra?
( One for part [Solid], one for clamps[surface], and regions[curve])
Thank you...
Robert
Rhino and IGES import problem (layers)
-
- Posts: 107
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Bavaria, EU-Germany
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Rhino and IGES import problem (layers)
Hi Robert,
This is a bug that has been fixed in our SP8. You can download a pre-release SP from this link. Unzip the contents into the VIsualMill installation folder.
www.mecsoft.com/VisualMill5_0.zip
This is a bug that has been fixed in our SP8. You can download a pre-release SP from this link. Unzip the contents into the VIsualMill installation folder.
www.mecsoft.com/VisualMill5_0.zip
-
- Posts: 107
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Bavaria, EU-Germany
Rhino and IGES import problem (layers)
Thank you for your immediately response.
This is the reason, I like MECSOFT...
Robert
This is the reason, I like MECSOFT...
Robert
-
- Posts: 107
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Bavaria, EU-Germany
Rhino and IGES import problem (layers)
Hi all,
I'm testing this SP8 beta since 2 weeks.
On some things I have still trouble, but I do all my work with it.
If you find such trouble things, please report it to Mecsoft ([email protected])immediately, that we can have the best VM we ever had.
Best Regards
Peter
I'm testing this SP8 beta since 2 weeks.
On some things I have still trouble, but I do all my work with it.
If you find such trouble things, please report it to Mecsoft ([email protected])immediately, that we can have the best VM we ever had.
Best Regards
Peter
-
- Posts: 107
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Bavaria, EU-Germany
Rhino and IGES import problem (layers)
Hi all,
now import is perfect.
I did not recognize a problem now, but even since SP7 my
Valley remachining is worse. Tool leaves part and even mill into
surfaces. Only help is to take pencil tracing.
Best regards
Robert
now import is perfect.
I did not recognize a problem now, but even since SP7 my
Valley remachining is worse. Tool leaves part and even mill into
surfaces. Only help is to take pencil tracing.
Best regards
Robert