Post modification

[Jimildoo]

Hi There,

I'm getting the Spindle start and speed line appearing on the same line as the first GoTo move, and cant find a way to make it go to the next line -

N1 G21 G90
N2 G90 G17 G40
N3 M6 T2 G43 H2
N4 G90 G00 X50.179 Y44.000 Z3.000 S18000 M3 G04 P4000
N5 G01 Z-3.000 F1500.;
N6 X2471.682 F4000.;

Should appear like this -

N1 G21 G90
N2 G90 G17 G40
N3 M6 T2 G43 H2
N4 G90 G00 X50.179 Y44.000 Z3.000
N5 S18000 M3 G04 P4000
N6 G01 Z-3.000 F1500.;
N7 X2471.682 F4000.;

Help would be appreciated

Jim

[juliao]

HI..

It would be easyer if you tell what postprocessor you are using and if you could,put it here. I´m sure someone could change it for you.
For what i see it´s a very simple thing to do.


Regards

Julião

[MecSoft Support]

Could you upload the post processor *.spm file and we can take a look at it.