Speed and feed settings are not saved.

Hirudin · Post by **Hirudin** » Tue Mar 10, 2009 10:32 pm

I have Rhino 4.0 with the latest service release (5b) and am using RhinoCAM 2.0 Standard with the latest update (2,0,1,13).

If I edit the speed/feed settings of a tool, save the tool library, then close and re-open Rhino the speed/feed settings will be lost. Even loading the tool library again doesn't work.

Post by **MecSoft Support** » Thu Mar 12, 2009 11:57 am

Hirudin,

When saving tools to library, under Save as type use VisualMILL Knowledge Base Files (*.vkb)

When loading a tool library under Files of type use VisualMILL Knowledge Base Files (*.vkb)

This would save the feeds/speeds setting for all tools.

Hirudin · Post by **Hirudin** » Fri Mar 13, 2009 7:15 am

Cool, I did what you said and it now works! This is going to save me a bunch of time!