been a few weeks, just wondering how its going and when we could be expecting to see it?
also, what's the status with being able to add curves to a MOP, instead of having to deselect everything and then reselect it them all just to add one curve.
thanks.
any news on sorting getting added to engraving or profile?
-
- Site Admin
- Posts: 64
- Joined: Mon Aug 20, 2007 11:11 am
- Location: Irvine, CA
- Contact:
Ryan,
We know this is important to you. We have told you that we are working on it and this functionality will be in one of our releases in the near future. However, we cannot tell you exactly when this will occur since we have multiple projects being worked on and we have to balance our releases in concert with these projects. We take our customer requests seriously and do our best to incorporate them into our product. But please do not harass us with your requests. This really is not going to help your cause. We are doing our best and appreciate your patience.
We know this is important to you. We have told you that we are working on it and this functionality will be in one of our releases in the near future. However, we cannot tell you exactly when this will occur since we have multiple projects being worked on and we have to balance our releases in concert with these projects. We take our customer requests seriously and do our best to incorporate them into our product. But please do not harass us with your requests. This really is not going to help your cause. We are doing our best and appreciate your patience.
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Sorting for Engraving has been added to RhinoCAM 2.0.1.12
For more information check the announcement at:
http://www.mecsoft.com/phpbb/viewtopic.php?t=1691
For more information check the announcement at:
http://www.mecsoft.com/phpbb/viewtopic.php?t=1691