Rhinocam and Roland JWX-10

arxech · Post by **arxech** » Wed Aug 13, 2008 8:19 am

Hello Everyboldy,

I am looking for Rhinocam Posts for Roland JWX-10. If someone has it, could you please let me have it? or submit to MecSoft and make me download it?

Thank you in advance.

Tae

Post by **MecSoft Support** » Wed Aug 13, 2008 10:35 am

Download the MDX-40 post from

http://www.mecsoft.com/Mec/Downloads/posts.shtml

Copy it to the Posts folder under the RhinoCAM installation folder.

This will work for the JWX-10 as well.

arxech · Post by **arxech** » Fri Aug 22, 2008 5:55 am

Dear Mecsoft,

Thank you for you help and I have another problem with MDX-40 post.

First problem was that the spindle speed was not controlled but I solved it with post generator in rhinocam.

But second problem is that the MDX-40 post is not compatible with 4th Axis of jwx-10. I took several look at codes that was generated from rhinocam. but I have no idea to solve it. Could you please help me to solve this problem?

Thank you in advance.

Tae

Post by **MecSoft Support** » Wed Aug 27, 2008 9:09 am

Please send a detailed email to [email protected] and we will take a look at your problem.