Hello Everyboldy,
I am looking for Rhinocam Posts for Roland JWX-10. If someone has it, could you please let me have it? or submit to MecSoft and make me download it?
Thank you in advance.
Tae
Rhinocam and Roland JWX-10
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Download the MDX-40 post from
http://www.mecsoft.com/Mec/Downloads/posts.shtml
Copy it to the Posts folder under the RhinoCAM installation folder.
This will work for the JWX-10 as well.
http://www.mecsoft.com/Mec/Downloads/posts.shtml
Copy it to the Posts folder under the RhinoCAM installation folder.
This will work for the JWX-10 as well.
Dear Mecsoft,
Thank you for you help and I have another problem with MDX-40 post.
First problem was that the spindle speed was not controlled but I solved it with post generator in rhinocam.
But second problem is that the MDX-40 post is not compatible with 4th Axis of jwx-10. I took several look at codes that was generated from rhinocam. but I have no idea to solve it. Could you please help me to solve this problem?
Thank you in advance.
Tae
Thank you for you help and I have another problem with MDX-40 post.
First problem was that the spindle speed was not controlled but I solved it with post generator in rhinocam.
But second problem is that the MDX-40 post is not compatible with 4th Axis of jwx-10. I took several look at codes that was generated from rhinocam. but I have no idea to solve it. Could you please help me to solve this problem?
Thank you in advance.
Tae
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Please send a detailed email to [email protected] and we will take a look at your problem.