My posted topic sums it all up.
As mentioned my reseller (who has been operating and programming the same machine as mine for a lot of years) spent a lot of time here Saturday helping me work out some bugs and improve my programming skills. We tried a multitude of different MOPs and configurations and no matter what we did VM5.04 always used the clearance plane setting and would not use the skim cut setting.
I am sure this feature worked in VM4.
Skim cut transfer will NOT work
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Skim cut transfer will NOT work
Seems like a part specific problem. We also need to know with what operation types you are having this problem. The best way to solve tackle such issues is to send your part to [email protected] with a detailed description of the problem. We need to see the part before we can suggest a solution.