My felder ISO post will not change tools. The entire sheet is run with just the first tool. in this case, T1306. I am running a 2023 felder profit with tpa operating software. Also the tpaCAD software wont open the .tcn files that this postprocessor produces.
Thanks
toolpath attached as .txt file because this forum won't allow .nc or .tcn or even .txt files!?!?!
Felder ISO post no toolchange
-
MS1694454950
- Posts: 9
- Joined: Mon Sep 11, 2023 10:57 am
Felder ISO post no toolchange
- Attachments
-
- 0.75 plywood sheet 1.doc
- (54.33 KiB) Downloaded 312 times
-
- Felder_ISO.spm
- (18.57 KiB) Downloaded 314 times
-
MS1694454950
- Posts: 9
- Joined: Mon Sep 11, 2023 10:57 am
Re: Felder ISO post no toolchange
Mystery solved. ISO posts generally do not allow tool changes.
We had Mecsoft write a new post for our machine, it took some back and forth, but Joe had tremendous patience with me. All is working well thank you!!!
We had Mecsoft write a new post for our machine, it took some back and forth, but Joe had tremendous patience with me. All is working well thank you!!!