Analyze Distance

All discussion related to the VisualCAD/CAM standalone product.
Post Reply
1449157671
Posts: 24
Joined: Thu Dec 03, 2015 2:13 pm
Location: Michigan
Contact:

Analyze Distance

Post by 1449157671 »

Using analyze to check a distance or an arc form the analyze menu will only flash the value for a split second (not at all long enough to see) before the prompt shows back up. Interestingly enough I did notice that this function worked properly before I registered the 2019 demo. I was running 2017 and it did not work for me there either.
1449157671
Posts: 24
Joined: Thu Dec 03, 2015 2:13 pm
Location: Michigan
Contact:

Re: Analyze Distance

Post by 1449157671 »

Any answers for this and the tool path question?
1449157671
Posts: 24
Joined: Thu Dec 03, 2015 2:13 pm
Location: Michigan
Contact:

Re: Analyze Distance

Post by 1449157671 »

Still nothing? It wold be a nice feature if it worked....Maybe I have a setting wrong?
MecSoft Support
Posts: 2405
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA
Contact:

Re: Analyze Distance

Post by MecSoft Support »

Hello,
You can drag the command prompt window down to see more than just the one line.
The value is likely in the line above the last line.
1449157671
Posts: 24
Joined: Thu Dec 03, 2015 2:13 pm
Location: Michigan
Contact:

Re: Analyze Distance

Post by 1449157671 »

Crap...That was simple
Post Reply