Unable to view model and toolpaths

All discussion related to the VisualCAD/CAM standalone product.
Post Reply
wabecomilluser
Posts: 24
Joined: Tue Jul 26, 2011 2:21 pm

Unable to view model and toolpaths

Post by wabecomilluser »

I have Visualmill 2015. For some reason if I open up the program everything appears as it should. I load a previous file and all is there apart from the model and toolpaths. I have tried other files with the same result. I have tried drawing some lines and circles to see if they appear which they don't. Never had this issue before. I would appreciate some help. There is no UCS symbol in that window either.
MecSoft Support
Posts: 2405
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA
Contact:

Re: Unable to view model and toolpaths

Post by MecSoft Support »

Check if the Simulate tab active in your VisualCAM Machining Operations Browser. If you do switch back to Program tab and check if your part geometry is visible. By default part visibility is toggled off when simulate tab is active. To toggle toolpath visibility on, select toolpath visibility located at the base of the machining operations browser.
wabecomilluser
Posts: 24
Joined: Tue Jul 26, 2011 2:21 pm

Re: Unable to view model and toolpaths

Post by wabecomilluser »

Problem is solved by shutting down and rebouting PC and reopening Visualmill. Don't know why this fixes it
Post Reply