Webinar: Using Robots for Milling
Posted: Thu Apr 02, 2020 11:46 am
On Wednesday, April 1st, 2020 we hosted an open webinar featuring ‘Using Robots for Milling’. We thank everyone that joined us.
We covered:
- Setup and preparation of a part for CAM programming using MecSoft CAM products
- Programming 3 to 5 axis toolpaths and post processing G-code
- Defining Robots and work cells using RoboDK
- Transferring CAD model & posted code from MecSoft CAM to RoboDK
- Verifying motions and sending code from RoboDK to the Robot controller
If you missed it, catch the replay at https://youtu.be/FMG-CkB4CL4
Please let us know if you have any questions.
Thank you.
We covered:
- Setup and preparation of a part for CAM programming using MecSoft CAM products
- Programming 3 to 5 axis toolpaths and post processing G-code
- Defining Robots and work cells using RoboDK
- Transferring CAD model & posted code from MecSoft CAM to RoboDK
- Verifying motions and sending code from RoboDK to the Robot controller
If you missed it, catch the replay at https://youtu.be/FMG-CkB4CL4
Please let us know if you have any questions.
Thank you.