MecSoft Corporation
https://mecsoft.com/phpbb/

Webinar: CAM in EDU
https://mecsoft.com/phpbb/viewtopic.php?f=9&t=3322
Page 1 of 1
Author:  MecSoft Marketing [ Thu Aug 31, 2017 7:42 am ]
Post subject:  Webinar: CAM in EDU

On Wednesday, August 30th we hosted an open webinar featuring CAM in EDU. We thank everyone that joined us.

We covered:
• Introduction
• CAM at Bill Bancroft Furniture Design, presented by Bill Bancroft, owner/operator of Bill Bancroft Furniture Design and Adjunct Professor at Wentworth Institute of Technology (Essex MA).
• Furniture Design Project, presented by student and intern Emma Schmidt, Junior at Wentworth Institute of Technology (Essex MA).
• Overview and Demo of MecSoft’s Educational Products
• Additional Educational Information and Resources
• Q&A


If you missed it, catch the replay at https://youtu.be/CKzD1puZVr0.

Please let us know if you have any questions. Thank you.
Page 1 of 1 All times are UTC - 8 hours [ DST ]