MecSoft Corporation

Webinar: Using Robots for Milling
Page 1 of 1
Author:  MecSoft Marketing [ Thu Apr 02, 2020 11:46 am ]
Post subject:  Webinar: Using Robots for Milling

On Wednesday, April 1st, 2020 we hosted an open webinar featuring ‘Using Robots for Milling’. We thank everyone that joined us.

We covered:

- Setup and preparation of a part for CAM programming using MecSoft CAM products
- Programming 3 to 5 axis toolpaths and post processing G-code
- Defining Robots and work cells using RoboDK
- Transferring CAD model & posted code from MecSoft CAM to RoboDK
- Verifying motions and sending code from RoboDK to the Robot controller

If you missed it, catch the replay at

Please let us know if you have any questions.

Thank you.
Page 1 of 1 All times are UTC - 8 hours [ DST ]