MecSoft Corporation

Posted: **Mon Mar 04, 2019 9:53 am**

Good afternoon,

I am trying to nest a handful of parts onto a sheet of MDF. As far as I know I have everything checked and crossed, but whenever i try to perform the nest I just get an "Algorithmic Failure" message. Is there something I'm missing?
I'll attach the file so that you can have a look at it.

Thanks,
Jesse

Posted: **Tue Mar 05, 2019 6:28 pm**

We are able to nest all parts to the sheet you defined. Please see attached.

Posted: **Wed Mar 06, 2019 4:38 am**

Thanks but now I'm confused. I opened your file and without modifying anything I tried nesting and it notified me of the same algorithmic failure. Do I need to reinstall the software? I am assuming it must be something to do with my computer.

Posted: **Wed Mar 06, 2019 11:57 am**

We have verified this on 2 different machines running RhinoCAM 2019 for Rhino 6.0 and unable to duplicate the error. Please make sure you have the latest update of RhinoCAM 2019 installed. Select RhinoCAM from the menu and Check for Updates. If the problem still persist, please give us call.

MecSoft Corporation

Nesting not possible due to "Algorithmic Failure"

Nesting not possible due to "Algorithmic Failure"

Re: Nesting not possible due to "Algorithmic Failure"

Re: Nesting not possible due to "Algorithmic Failure"

Re: Nesting not possible due to "Algorithmic Failure"