Nesting not possible due to "Algorithmic Failure"

All topics related to RhinoCAM
Post Reply
1394659380
Posts: 20
Joined: Mon May 19, 2014 1:05 pm

Nesting not possible due to "Algorithmic Failure"

Post by 1394659380 »

Good afternoon,

I am trying to nest a handful of parts onto a sheet of MDF. As far as I know I have everything checked and crossed, but whenever i try to perform the nest I just get an "Algorithmic Failure" message. Is there something I'm missing?
I'll attach the file so that you can have a look at it.

Thanks,
Jesse
Attachments
St Thomas Church Countertops.3dm
(259.19 KiB) Downloaded 688 times
MecSoft Support
Posts: 2405
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA
Contact:

Re: Nesting not possible due to "Algorithmic Failure"

Post by MecSoft Support »

We are able to nest all parts to the sheet you defined. Please see attached.
Attachments
St Thomas Church Countertops-REV1.3dm
(849.91 KiB) Downloaded 639 times
1394659380
Posts: 20
Joined: Mon May 19, 2014 1:05 pm

Re: Nesting not possible due to "Algorithmic Failure"

Post by 1394659380 »

Thanks but now I'm confused. I opened your file and without modifying anything I tried nesting and it notified me of the same algorithmic failure. Do I need to reinstall the software? I am assuming it must be something to do with my computer.
MecSoft Support
Posts: 2405
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA
Contact:

Re: Nesting not possible due to "Algorithmic Failure"

Post by MecSoft Support »

We have verified this on 2 different machines running RhinoCAM 2019 for Rhino 6.0 and unable to duplicate the error. Please make sure you have the latest update of RhinoCAM 2019 installed. Select RhinoCAM from the menu and Check for Updates. If the problem still persist, please give us call.
Post Reply