RhinoCAM 2018 GUI bug in 3D Offset Pocketing
Posted: Mon Nov 26, 2018 11:09 pm
Identified in RhinoCAM 2018 v8.0.0.28.
In 3D Offset Pocketing enter 'Cut Parameters' change something then click 'Generate'. Always get message "Select control geometry for machining before proceeding" regardless of selected geometry. Workaround by clicking 'Save' then rgenerate from drop down menu.
In 3D Offset Pocketing enter 'Cut Parameters' change something then click 'Generate'. Always get message "Select control geometry for machining before proceeding" regardless of selected geometry. Workaround by clicking 'Save' then rgenerate from drop down menu.