RhinoTurn - Leave stock on X but not Z axis

All topics related to RhinoCAM
Post Reply
1384986994
Posts: 31
Joined: Mon May 19, 2014 1:05 pm

RhinoTurn - Leave stock on X but not Z axis

Post by 1384986994 »

We are working mostly with solid models supplied from our customer that are drawn to finish size. Many times we will have to leave stock on a diameter (X) for grind, but not the shoulder (Z) or vice versa. We are used to having an option for X stock and an option for Z stock ( We have used Mazatrol, Mastercam etc.. ). Is there an easy way to do this without having to create extra geometry? The "Stock" feature leaves the stock on both X & Z and we would like to be able to choose each axis separately.
MecSoft Support
Posts: 2405
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA
Contact:

Re: RhinoTurn - Leave stock on X but not Z axis

Post by MecSoft Support »

Currently you have to create additional geometry to do this. We will add an enhancement to the system
Post Reply