Ok, I have strange problem.
I have ring and toolpath is ok. But when I turn model (and "borderlines") 180 deg. this problem appears. See attach. pictures. Any idea why this happens?
I cant send this file to public but I can send it private if you need.
0degrees->everything is ok
180degrees->you see this problem
Strange problem *solved*
Strange problem *solved*
Last edited by Mikko on Mon May 14, 2012 12:34 am, edited 1 time in total.
-
- Posts: 2405
- Joined: Wed Aug 01, 2007 4:15 pm
- Location: Irvine, CA, USA
- Contact:
Re: Strange problem
Hi, please send the file to [email protected] with the version # of RhinoCAM that you are running. Thanks.
Re: Strange problem
Problem solved. I send the file to Mecsoft, and fixed the problem. Problem was region curves.
Thanks for quick fix!
Thanks for quick fix!