Strange toolmarks in rotary toolpath

All topics related to RhinoCAM

Strange toolmarks in rotary toolpath

Postby MS1544233465 » Wed Feb 19, 2020 4:13 pm

Hi,

I have a large foam part to route/mill on my machine.

After running a simulation the stock after machining looks as expected with the exception of some strange tool marks?
Capture3.JPG
Capture3.JPG (51.93 KiB) Viewed 2322 times

It's a very large part (1500mm x 600mm stock) so the generation of toolpaths and simulation takes forever. Just wondering if someone looks at this and knows exactly what the cause is?
Hoping to save some trial and error.
Toolpath was rotary zig zag. I'm generating a cut along Y axis toolpath now to see if I get a different result. (Y being the axis I revolve around)

Thanks in advance.
MS1544233465
 
Posts: 1
Joined: Fri Dec 07, 2018 6:46 pm

Re: Strange toolmarks in rotary toolpath

Postby MecSoft Support » Tue Feb 25, 2020 2:21 pm

We would need to take a look at the file to determine if this shows up on the toolpath or if is only in the simulation. You can upload or email the file to us at support@mecsoft.com If the file is too larger for an email, please share a link to the file using a file sharing app.
MecSoft Support
 
Posts: 2489
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA


Return to RhinoCAM Topics & Support

Who is online

Users browsing this forum: No registered users and 4 guests

cron