Unable to view model and toolpaths

All discussion related to the VisualCAD/CAM standalone product.

Unable to view model and toolpaths

Postby wabecomilluser » Thu Jan 25, 2018 1:41 pm

I have Visualmill 2015. For some reason if I open up the program everything appears as it should. I load a previous file and all is there apart from the model and toolpaths. I have tried other files with the same result. I have tried drawing some lines and circles to see if they appear which they don't. Never had this issue before. I would appreciate some help. There is no UCS symbol in that window either.
wabecomilluser
 
Posts: 24
Joined: Tue Jul 26, 2011 2:21 pm

Re: Unable to view model and toolpaths

Postby MecSoft Support » Fri Jan 26, 2018 11:11 am

Check if the Simulate tab active in your VisualCAM Machining Operations Browser. If you do switch back to Program tab and check if your part geometry is visible. By default part visibility is toggled off when simulate tab is active. To toggle toolpath visibility on, select toolpath visibility located at the base of the machining operations browser.
MecSoft Support
 
Posts: 2464
Joined: Wed Aug 01, 2007 4:15 pm
Location: Irvine, CA, USA

Re: Unable to view model and toolpaths

Postby wabecomilluser » Mon Jan 29, 2018 9:22 am

Problem is solved by shutting down and rebouting PC and reopening Visualmill. Don't know why this fixes it
wabecomilluser
 
Posts: 24
Joined: Tue Jul 26, 2011 2:21 pm


Return to VisualCAD/CAM Topics & Support

Who is online

Users browsing this forum: No registered users and 2 guests

cron