Webinar: CAM in EDU

All discussion related to the VisualCAD/CAM standalone product.
Post Reply
MecSoft Marketing
Posts: 397
Joined: Wed Oct 07, 2009 11:10 am
Location: Irvine, CA - 92614
Contact:

Webinar: CAM in EDU

Post by MecSoft Marketing »

On Wednesday, August 30th we hosted an open webinar featuring CAM in EDU. We thank everyone that joined us.

We covered:
• Introduction
• CAM at Bill Bancroft Furniture Design, presented by Bill Bancroft, owner/operator of Bill Bancroft Furniture Design and Adjunct Professor at Wentworth Institute of Technology (Essex MA).
• Furniture Design Project, presented by student and intern Emma Schmidt, Junior at Wentworth Institute of Technology (Essex MA).
• Overview and Demo of MecSoft’s Educational Products
• Additional Educational Information and Resources
• Q&A


If you missed it, catch the replay at https://youtu.be/CKzD1puZVr0.

Please let us know if you have any questions. Thank you.
Post Reply