Webinar: Programming Robots for Machining Using MecSoft CAM

All discussion related to the VisualCAD/CAM standalone product.
Post Reply
MecSoft Marketing
Posts: 397
Joined: Wed Oct 07, 2009 11:10 am
Location: Irvine, CA - 92614
Contact:

Webinar: Programming Robots for Machining Using MecSoft CAM

Post by MecSoft Marketing »

On April 26, 2017, we hosted an open webinar on PROGRAMMING ROBOTS FOR MACHINING USING MECSOFT CAM & IRBCAM. We thank everyone that joined us.

We covered:
• Robot Programming application
• Customer showcase
• Setup and preparation of a part for CAM programming using MecSoft CAM products
• Programming 3 to 5 axis toolpaths and post process G-code
• Defining a Robot station using IRBCAM's wizard interface
• Seamless transfering of CAD model data & posted code from MecSoft CAM to IRBCAM
• Configuring targets, verifying motions and output code from IRBCAM to the Robot controller

If you missed it, catch the replay at: https://youtu.be/tzPDWp3pVwc.

Please let us know if you have any questions. Thank you.
Post Reply