Ayone Using A Roland 650....

All discussion related to the VisualCAD/CAM standalone product.
Post Reply
tattooz2
Posts: 7
Joined: Wed Aug 01, 2007 4:15 pm
Location: Oxnard, Ca. USA

Ayone Using A Roland 650....

Post by tattooz2 »

I am anxious to speak with anyone running a 650 with Rotary axis. I am finding the Visual Mill generally friendly although I am getting random results in terms of part accuracy. For instance mating halves that were built one right after another following (yet another) Y center, tool length scan and z center.
Post Reply