MecSoft Corporation
https://mecsoft.com/phpbb/

ShopBot at IWF uses 5 axis RhinoCAM
https://mecsoft.com/phpbb/viewtopic.php?f=4&t=2236
Page 1 of 1
Author:  MecSoft Marketing [ Mon Aug 30, 2010 12:05 pm ]
Post subject:  ShopBot at IWF uses 5 axis RhinoCAM

Here are some pictures from the ShopBot booth at the IWF show in Atlanta, week of Aug 23rd. They were showing some 5 axis cuts using RhinoCAM.

Attachments:
Img_2716.jpg
Img_2716.jpg (78.07 KiB) Viewed 14739 times
Img_2714.jpg
Img_2714.jpg (35.4 KiB) Viewed 14739 times
Img_2688.jpg
Img_2688.jpg (46.74 KiB) Viewed 14739 times
Author:  postalgbv [ Mon Aug 30, 2010 6:18 pm ]
Post subject: 

I saw it and talked to Ted Hall for awhile about it. Machine seemed pretty cool for a 'low budget' machine. I've got a Camaster and had a few photos up at their booth, all stuff done with Rhinocam2 Basic.
Author:  MecSoft Marketing [ Mon Aug 30, 2010 8:51 pm ]
Post subject: 

Yes we are working with Ted to get the 5 axis continuous ready for his machine. Exciting stuff.

Also did you also see Laguna Tools who was introducing a 4 axis machine and we helped them model and machine a pretty ornate table leg? We will post pictures once we get a few from them.
Author:  postalgbv [ Mon Aug 30, 2010 9:32 pm ]
Post subject: 

I missed the Laguna machine somehow, so post thos epics when you find. I'd be interested to see that.

I try to get the Camaster crowd into Rhino/Rhinocam, but alot seem to come from non-CAD backgrounds, and find Vectric type programs more 'friendly' to start with. I find those kind of programs a real pain to draft in though.
Page 1 of 1 All times are UTC - 8 hours [ DST ]