MecSoft Corporation
https://mecsoft.com/phpbb/

Fast Text From ACAD
https://mecsoft.com/phpbb/viewtopic.php?f=3&t=1073
Page 1 of 1
Author:  BJMAUCH [ Mon May 24, 2004 9:53 pm ]
Post subject:  Fast Text From ACAD

I use Autocad lite for my 2D drawing. When the part is milled a text identifier needs to be milled into the mold. Although several methods are available to place text in VM they all use multi-line letters. I wanted to use simple letters that would take minimum time to cut, but ACAD would not output text as lines.
One way to get the result I wanted is to place the text using the txt font in a blank drawing and then save the file as type .WMF. When this file is then inserted into the part drawing it is the text drawn with lines, (you may need to explode it and delete the solid that is sometimes output).
Now you can read the reagions for the part in VM and engrave the text with one single line drawing of each letter. (Three times faster cutting that the outline text, at 1/2 IPM in steel this is a lot!!)
Author:  GreggT [ Thu May 27, 2004 1:07 pm ]
Post subject:  Fast Text From ACAD

Excellent tip thanks.

GreggT
Author:  DareBee [ Fri May 28, 2004 11:46 am ]
Post subject:  Fast Text From ACAD

Thanks I've been trying to do this for months.
Maybe Mecsoft can give us a single line text font within VM as I usually create my engraving text from within VM.
Author:  SmokeDaddy [ Sun Oct 09, 2005 7:06 pm ]
Post subject:  Fast Text From ACAD

Just to clarify, for those not familiar with AutoCAD (just as I'm not with CNCing or RhinoCAM) you use the EXPORT command in AutoCAD and then select the Files as Type (if necessary) to save as a .WMF file. If you want to use the newly created text (.WMF file) in a new drawing, select INSERT from the pulldown menu at the top of the screen and click on Windows MetaFile. Then navigate to the directory (folder) where you saved the .WMF file and select it. After you place the .WMF file in the new drawing, use the explode command to make the text into individual entities.

-SD:



[Edited by SmokeDaddy on 09-Oct-05 19:24]
Page 1 of 1 All times are UTC - 8 hours [ DST ]