Download VisualCAM 2019 for SOLIDWORKS

The downloads here are for customers only! You will need a valid license to run these products.

64 bit

Download & install:
If you are running a previous version of VisualCAM for SOLIDWORKS, make sure you do the following before installing the new version:

  • Release your software license
  • Uninstall the older version completely

VisualCAM 2019 for SOLIDWORKS (64 Bit)

*Click the button above to download. Then, to install, double click the downloaded program and follow the onscreen instructions.

32 bit

Download & install:
If you are running a previous version of VisualCAM for SOLIDWORKS, make sure you do the following before installing the new version:

  • Release your software license
  • Uninstall the older version completely

VisualCAM 2019 for SOLIDWORKS (32 Bit)

*Click the button above to download. Then, to install, double click the downloaded program and follow the onscreen instructions.

Changes to VisualCAM 8.0.445 for SOLIDWORKS (April 11, 2019):

1. Location of coolant output in the posted code can now be controlled was implemented
2. 5 Axis World Coordinate Output can now be output in the post-processor was implemented
3. Simulation in version 2019 is slow when compared to 2018 was fixed
4. Simulating a 4 axis drill operation tilts the tool by 90 degrees upon retract and gouges the part model was fixed
5. When “Show Output Dialog when Post-Processing” is unchecked, system returns serious error was fixed
6. Issue with Surface Normal machining on Table-Head machine was fixed
7. 5-axis tilt lines issue with tool tilt was fixed
8. Turn finishing will not machine entire containment region
9. Other minor UI fixes